Pro Cycle
The Pro Cycle has quickly become one of America’s #1 motorcycle lifts. All-Pro Cycle lifts have a 93” table, a 20” approach ramp, and are air operated. Direct Lift provides the best in motorcycle lifts for the hobbyist as well as the professional motorcycle shop. The Pro Cycle bike lift has a weight capacity of 1000 lbs and is suitable for a wide range of different style bikes.
- 93″ table length w/o ramp
- Diamond plate surface
- Vise included
- Powder-coated
- Air operated / Foot pedal
- Available in Black color only.
- Length w/ ramp 113″
- Length w/o ramp 93″
- Removeable Approach Ramp 20″
- Air Requirements 90 – 100 PSI
- Width 24″
- Full Rise 33″
- Fully Lowered 7-1/4″
- Capacity 1,000 lbs.
- Shipping Weight 450 lbs.
Pro Cycle DT
The Pro Cycle DT and Pro Cycle XLT DT are the same as their standard bike lift counterparts (the Pro Cycle and Pro Cycle XLT, respectively), except the “DT” aka “Drop Tail” has been added for easier wheel service. Blackjack 1000 pound jack shown is not included.
- 93″ table length w/o ramp
- Diamond plate surface
- Vise included
- Powder-coated
- Extended length standard
- Air operated / Foot pedal
- Available in Black color only.
- Length w/ ramp 113″
- Length w/o ramp 93″
- Removable Approach Ramp 20″
- Air Requirements 90 – 100 PSI
- Width 24″
- Full Rise 33″
- Fully Lowered 7-1/4″
- Capacity 1,000 lbs.
- Shipping Weight 450 lbs.
- Length of Cut Out 19-1/2″
Pro Cycle XLT
The Pro Cycle XLT comes with two 12” side extensions, a wheel vise, and dolly. The Pro Cycle XLT is an excellent choice for anyone looking to service ATVs, motorcycles, or anything else that will fit on the 93” long x 48” wide table.
- Perfect for ATV’s, motorcycles, etc.
- 93″ table length w/o ramp
- Side extensions included
- Diamond plate surface
- Vise included
- Powder-coated
- Air operated / Foot pedal
- Wheeled dolly included
- Available in Black color only.
- Length w/ ramp 113″
- Length w/o ramp 93″
- Removeable Approach Ramp 20″
- Air Requirements 90 – 100 PSI
- Width 48″
- Full Rise 33″
- Fully Lowered 7-1/4″
- Capacity 1,000 lbs.
- Shipping Weight 700 lbs.
X-Force ATV
- Multi range lifting height
- Accomplish more at any level, detail work, tire and brake work, underside repair
- Narrow platform (Suspension work clearance, Golf Cart repair, 4 Wheeler work)
- 1+ Ton of lifting capacity, work the big, work the small
- Hydraulic cylinder includes locking teeth (See below for benefit)
Working on your ride is part of the fun of having a ride to begin with. Direct Lift lets you work on anything from cars and trucks to motorcycle and utility vehicles, commonly referred to a UTV’s. The new X-Force is narrow and sits 4.25 inches off the ground lowered. You can drive a golf cart over it and pick it up without issue. You have plenty of pickup options with this lift. Fold up ramps let you extend the lifting capability.
- Perfect for UTV’s, Motorcycles, Golf carts, etc.
- 85″ table length w/ramps
- Diamond plate surface
- Powder coated
- Hydraulic operated / Conventional pedestal mounted controls
- Available in Blue color only.
X-Force has 26 locking positions with its hydraulic cylinder. You reduce wear and tear on your lift by lowering it to the lock when you are working on an ATV, golf cart, or side by side. Reduce back strain, knee strain and get into places and modify that ride. Detail the heck out of the thing then go get it muddy again.
- Capacity 2,275 lbs.
- Maximum Rise* 78 – 5/8”
- Lowered Height 4 – 1/8”
- Overall Width 26 – 3/8”
- Overall Length 85”
- Platform Width 24 – 3/4”
- Platform Length 59”
- Ramp Length 13”
- Distance from Console to Lift (Max) 85”
- Motor / Voltage 1Ø 2 HP / 115v
- Time of Full Rise 40 seconds
- Compressed Air Connection 85 – 110psi
Pro Cycle XLT DT
The Pro Cycle DT and Pro Cycle XLT DT are the same as their standard bike lift counterparts (the Pro Cycle and Pro Cycle XLT, respectively), except the “DT” aka “Drop Tail” has been added for easier wheel service. This lift is perfect for use as an ATV or motorcycles lift.
- Perfect for ATV’s, motorcycles, etc.
- 93″ table length w/o ramp
- Side extensions included
- Diamond plate surface
- Vise included
- Powder-coated
- Air operated / Foot pedal
- Wheeled dolly included
- Available in Black color only.
- Length w/ ramp 113″
- Length w/o ramp 93″
- Removeable Approach Ramp 20″
- Air Requirements 90 – 100 PSI
- Width 48″
- Full Rise 33″
- Fully Lowered 7-1/4″
- Capacity 1,000 lbs.
- Shipping Weight 700 lbs.
- Length of Cut Out 19-1/2″
Accessories
- Chopper Extension
- Motor Jack
- XLT Kit
- Motorcycle Dolly
Two Post Lifts
Straightforward function of a two-post lift to lift a vehicle safely to facilitate any work you want to do. Direct Lift offers low ceiling baseplate models and the popular 9,000-pound capacity DL9. These are two post lifts are ideal for a garage where you work on cars or for the do it yourself shop that wants everyone to come over all the time and use the lift!